Nippon Labs 18AWG Power Extension Cable, Green C14 to C13, SJT 10A 250V

A green 18 AWG jumper cord with an IEC 60320 C14 plug on one end and a C13 connector on the other. This is the cord that runs from a UPS, PDU or rack power strip with C13 outlets to a server, switch, monitor or other device with a standard C14 inlet. It also works as an extension for an existing C13 power cord.

Specifications

• Connector A: IEC 60320 C14 (male, plugs into a C13 outlet on a UPS or PDU)
• Connector B: IEC 60320 C13 (female, fits a standard C14 device inlet)
• Cable: 18/3 SJT hard-service jacket, rated 105°C
• Rating: 10A at 250V
• Color: Green
• Listing: UL

Good for

• Connecting servers, switches and storage to a UPS or rack PDU
• Color-coding power feeds so A and B circuits are easy to trace
• Adding reach to an existing C13 cord without an adapter

FAQ

Can I plug this into a wall outlet? No. The C14 end plugs into C13 outlets found on UPS units, PDUs and rack power strips. For a wall outlet you need a NEMA 5-15P to C13 cord.

Is 10A enough for my server? Most 1U and 2U servers, switches and storage arrays draw well under 10A. For high-wattage equipment with a C20 inlet, use a C19 cord instead.